cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4499
Views
0
Helpful
22
Replies

Courtesy Callback Configuration

ramimakram
Level 1
Level 1

Hello,

 

I have a problem with CVP reporting configuration. In Callback_Entry VXML application we get the _ccvServlet empty. I do not see anywhere in guides where this should be set.

Also i have tried to send "_userCourtesyCallbackEnabled" as set to 1, but it's always 0 in logs

 

CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,_userCourtesyCallbackEnabled=0
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,ani=201000265958
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,qname=billing
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,callid=C797E6F49C6211E7B55A30E4DBAAE680
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,queueapp=BillingQueue
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,_dnis=811111111110794
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,_ccbServlet=
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,ewt=100
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,_ani=201000265958
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,,start,parameter,_ccbServletReqTimeout=0
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.864,CVP Subdialog Start_01,enter,
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,CVP Subdialog Start_01,exit,done
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,AudioPath,enter,
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,AudioPath,exit,done
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,Enter Queue_01,enter,
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,Enter Queue_01,custom,Callback_Enter_Queue,ELEMENT_ENTRY
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,Enter Queue_01,element,warning,Could not retrieve "_ccbServlet". Please check your configuration.
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,Enter Queue_01,custom,Callback_Enter_Queue,ELEMENT_EXIT
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,Enter Queue_01,exit,error
10.3.222.26.1505820673864.2.CallbackEntry,09/19/2017 15:31:13.958,PlayErrorAudio1,enter,

22 Replies 22

For the benefit of the group, can you share what had to be added/changed?

Sure, it was mis-configuration on gateway as i am not familiar with gateway conf.

Below is feedback from TAC engineer:

Al calls on gateway have incoming dial-peer and outgoing dial-peer.

If incoming dial-peer is not specified – gw uses default inbound dial-peer.

But for CCB you need to configure service. Service is configured only on incoming dial-peer.

So you need specify incoming dial-peer for called number 999 (incoming called-number 999).

This means that all calls with called number 999 will be used this dial-peer as incoming.

 

dial-peer voice 201 pots

trunkgroup XXX

incoming called-number ^6105$

service cvp-survivability

direct-inward-dial

 

what was that missed config on ingress?

ramimakram stated that there was no incoming dial-peer configured, as such the call would hit default incoming dial-peer 0.

 

The survivability service needs to be configured on an incoming dial-peer, so one needed to be created.

carlos.trivino
Level 1
Level 1

Hi,

 

I'm having the same issue on a CVP 11.0 installation. My ICM script does have set the user.CourtesyCallbackEnabled set to 1. The difference is that my CVP script is called IVRCustomCallBack. In the logs of my CVP Script IVRCustomCallBack none of the call back parameters are shown:

 

192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,newcall,
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,ani,4167356729
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,areacode,416
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,exchange,735
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,dnis,5817
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,uui,NA
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,iidigits,NA
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,parameter,ani=4167356729
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,parameter,qname=billing
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,parameter,callid=6C34EA3431CA11E8A898AD655FB95A71
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,parameter,queueapp=BillingQueue
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,parameter,_dnis=5817
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,parameter,ewt=150
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,,start,parameter,_ani=4167356729
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.314,CVP Subdialog Start_01,enter,
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.377,CVP Subdialog Start_01,exit,done
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.377,Enter Queue_01,enter,
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.377,Enter Queue_01,custom,Callback_Enter_Queue,ELEMENT_ENTRY
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.377,Enter Queue_01,element,warning,Could not retrieve "_ccbServlet". Please check your configuration.
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.377,Enter Queue_01,custom,Callback_Enter_Queue,ELEMENT_EXIT
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.377,Enter Queue_01,exit,error
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.377,PlayErrorAudio1,enter,
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.381,PlayErrorAudio1,interaction,audio_group,initial_audio_group
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.393,PlayErrorAudio1,exit,done
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.393,Get Status_01,enter,
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.393,Get Status_01,custom,Callback_Get_Status,ELEMENT_ENTRY
192.168.32.177.1522247010314.0.IVRCustomCallBackEntry,03/28/2018 10:23:30.393,Get Status_01,element,warning,Could not retrieve "_ccbServlet". Please check your configuration.

 

CVP reporting server is up and runing as well as the Call Servers. Any help is appreciated.

 

Thanks.

 

Carlos Trivino

Well that error about the ccbServlet not running is disturbing. Does this work for you?

 

http://<REPORTING_SERVER>:8000/cvp/CallbackServlet?method=Diag

 

Regards,

Geoff

 

CallBackServlet.JPG

 

Hi Geoff,

 

Yes it does. Here is the screen shot:

 

 

It was mis-configuration on gateway as i am not familiar with gateway conf. Please check above comment marked as solution

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: