cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5089
Views
0
Helpful
18
Replies

CVP CUBE DTMF not working

Mark Applebee
Level 1
Level 1

     CVP with CUBE, DTMF is not worknig for any calls. CVP Logs below:

4192: 172.17.19.101: Sep 19 2012 20:56:47.739 -0400: %CVP_9_0_IVR-7-CALL:  {Thrd=http-8000-Processor22} VBServlet:service: HTTP Request from 172.17.253.252: { CALL_ID=04A5D28000010000000000AC6F1311AC, MSG_TYPE=CALL_RESULT, CALL_SEQ_NUM=1, ERROR_CODE=NO_ENTRY(17) } 

4193: 172.17.19.101: Sep 19 2012 20:56:47.739 -0400: %CVP_9_0_IVR-3-CALL_ERROR:  RunScript Error from 172.17.253.252 [NO_ENTRY(17)] CALLGUID: 04A5D28000010000000000AC6F1311AC DNIS=12711111111110148 {VRUScriptName: 'GD,-10' ConfigParam: '1,4,Y,2,8,1,1,N,N,#'} [id:3023]

.....

All the dial peer on CUBE is using dtmf-relay rtp-nte.CUBE logs are attached here. , anyone have an idea of why the dtmf is not working

Thanks

18 Replies 18

Mark, what is configured under your SIP Trunk option : ?

can you try it with No Preference ? and configure your incoming dial-peer with rtp-nte option ?

                   I have collected more traces to confirm it and I noticed that negotiated dtmf relay:rtp-nte in all cases. Please have a look at this logs.

Kris Lambrechts
Level 1
Level 1

dial-peer 1355 is missing this command :

dtmf-relay rtp-nte

Cheers,

Kris

Thanks everyone for your input. This was a new install and I was testing internally using 6921 phones. The problem was the phone load  and upgrading it to latest release fix the problem.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: