cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1204
Views
0
Helpful
4
Replies

CVP: Push media files to VXML GW in advanced

lohjintiam
Level 4
Level 4

Hi all,

 

In my environment, the UCCE-CVP is centralized in Country A while I have several remote offices with just VG (call terminated locally) & agents. Because of the high utilization of the WAN, there's a delay is getting/playing the prompts to the caller especially for newly updated/uploaded files in Country A.

 

Is there a way to upload the new prompts directly to the VXML GW in advanced (during offpeak hour) rather than the conventional method of on demand (peak hour)? Any other method to reduce/minimize the delay in playing the prompts to the caller?

 

Thanks!

-JT-

4 Replies 4

Chintan Gajjar
Level 8
Level 8

have you enabled caching on you VXML gateway?

when caching is enabled gateway only request the files from media server when caching time expires and file becomes outdated in gateway cache.

you can manually pull files in cache using below command.

audio-prompt load http://1.1.1.1/en-us/audio.wav

 

Hi,

Answering to "Any other method to reduce/minimize the delay in playing the prompts to the caller?"-- exectue the command param wan-delay-ringback 1 under CVP Surivivabilty

application

service cvp-survivability flash:survivability.tcl
  param wan-delay-ringback 1

Thanks,

Srinivasan

Ahmed Adeyemi
Level 4
Level 4

Chintan is correct. If you enable caching on your VXML and also specify the size of caching you require this would help eliminate your problem. In addition to that, if you frequently change the audio files, you can add an http timer method that the VXML goes to fetch the new wave file every specific time the call goes in which is based on the timer you set on the http cache.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: