A while back I deployed a solution with CVP sigdigit. I am currently now supporting another solution with CVP location based CAC. I found this configuration for location based CAC to be laborious and prone to errors ( in a case where an administrator does not add the location id, site id to CVP or assign location to phones in CUCM).
My question is what is the recommended or preferred solution based on experience and adoption. Are there any advantages that one offer over the other ( that perhaps I am not aware of)
For what it's worth, we (the Cisco Partner I work for) use SigDigits as our best practice. I've never really used CAC other than legacy upgrades, but I would think that keeping track of site ID or making a mistake in CUCM would not make CAC an attractive solution. I've also found that troubleshooting with SigDigits is a lot easier than without - it gives you an idea of the comprehensive call flow is doing its job (prepending SigDigits, stripping it, adding it back on, etc...)
I tried to upgrade the firmware of my Cisco 7960 into SIP using a CISCO 2811 router and a CISCO 2960 switch. The upgrade is successful, but the IP phones keep on showing UNPROVISIONED SIP. How could I fix this. I'm trying to build an IP telephony sys...
I have a customer that is running CME 12 and all of his phones located at the office where the CME resides work just fine. We just connected a satellite office to it using a ASA to ASA Site to Site VPN Tunnel. The remote site is work...
Hello everyone, in this video you can see the differences between various VoIP codecs. I also put the frequency analysis of each codec, so you can see the differences clearly.
Here are the codecs in the video : G.711 alaw, G.711 ulaw,&nbs...
I am getting CUCM OnBehalfof Codes is 17, while i see the description of the issue is
Call manager, Unified Communications Applications
So what is mean by refer, Kindly any one help me out this.