06-11-2013 09:58 AM - edited 03-14-2019 11:52 AM
Hi,
It is a fresh installation of ucce 9.0(3) with CVP 9.0
I am using sip comprehensive model (without SIP proxy).
After I have finished the installation, all the pims are active and the same for the call server and vxml server.
For some reason, the call is reaching the icm script then disconnected.
the logs collected from the Call server:
2202: 10.15.19.21: Jun 11 2013 03:20:54.544 +0300: %CVP_9_0_Infrastructure-2-HEARTBEATS_STOPPED: Heartbeats from RPT1 stopped. Unilaterally setting state to PARTIAL_SERVICE. Sending update. [id:1011]
159: 10.15.19.21: Jun 11 2013 11:33:28.567 +0300: %CVP_9_0_SIP-3-SIP_CALL_ERROR: CALLGUID = 8041B895D8E0611B41004501C0A879C3 LEGID = 6CD52037-D1A811E2-B9BB90EF-14EB87BB - [INBOUND] - DIALOGUE_FAILURE from ICM Router sends 404 rejection to call. errorcode=5 [id:5004]
162: 10.15.19.21: Jun 11 2013 11:33:28.567 +0300: %CVP_9_0_SIP-3-SIP_CALL_ERROR: CALLGUID = 8041B895D8E0611B41004501C0A879C3 LEGID = 6CD52037-D1A811E2-B9BB90EF-14EB87BB - [INBOUND] - ABNORMALLY ENDING - SIP code [404], Reason Hdr [SIP;cause=404] Not Found, GW call using SURV TCL flag [false], NON NORMAL flag [true], DNIS [8555], ANI [8038] with AGE (msecs) 47 and Call History : [id:5004]
Thanks in advance,
George
06-12-2013 09:05 AM
Hi,
Regards,
Srinivasan
06-12-2013 09:23 AM
Hi Srinivasan,
The maximum length is 10.
As for the network vru, it is type 10 and its value is 8111111111 for cvp1 and 8111111112 for cvp2
Thanks in advance
Regards
Sent from Cisco Technical Support iPhone App
06-12-2013 10:17 PM
Please attach the complete rtr and call servr logs.
Also check
06-17-2013 01:19 PM
Hi Srinivasan,
Thank you for your help...
The issue was that we have an access list on the voice gateway blocking port 5060.
Thanks anyway
George
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide