02-08-2019 07:08 AM - edited 03-14-2019 06:47 PM
Hi Folks,
Do we need to enable DirectPath I/O for both Public and Private VM NIC settings in UCCE deployment for Router, Logger and PGs. Deployment type B-series with SAN not UCS servers. What i remember it should be disable for both NIC or only enable on Public link but i am not able to find any guide for this setting. Please find attached the screen short.
Thanks,
Sheeraz.
Solved! Go to Solution.
02-08-2019 09:01 AM - edited 02-08-2019 09:14 AM
Inactive for both vNICs... the OVA template from Cisco controls that setting
Correction.... both Public and Private should be Enabled. Again, controlled by the Cisco OVA template
02-08-2019 09:01 AM - edited 02-08-2019 09:14 AM
Inactive for both vNICs... the OVA template from Cisco controls that setting
Correction.... both Public and Private should be Enabled. Again, controlled by the Cisco OVA template
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide