cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1276
Views
0
Helpful
1
Replies
Sheraz Saeed Lodhi
Participant

DirectPath I/O option Enabled on VMXNET3 for UCCE NIC

Hi Folks,

Do we need to enable DirectPath I/O for both Public and Private VM NIC settings in UCCE deployment for Router, Logger and PGs. Deployment type B-series with SAN not UCS servers. What i remember it should be disable for both NIC or only enable on Public link but i am not able to find any guide for this setting. Please find attached the screen short.

 

 

Thanks,

Sheeraz.

1 ACCEPTED SOLUTION

Accepted Solutions
Omar Deen
Collaborator

Inactive for both vNICs... the OVA template from Cisco controls that setting

 

Correction.... both Public and Private should be Enabled. Again, controlled by the Cisco OVA template

View solution in original post

1 REPLY 1
Omar Deen
Collaborator

Inactive for both vNICs... the OVA template from Cisco controls that setting

 

Correction.... both Public and Private should be Enabled. Again, controlled by the Cisco OVA template

Create
Recognize Your Peers
Content for Community-Ad