07-07-2006 10:52 AM - edited 03-13-2019 11:54 PM
We have IPCC Express CRA 3.5(2) version
Right now the reporting software - Cisco CRA Historical Reports - has the target service level set at 40 seconds. how can we would go about changing that to 30 seconds?
Solved! Go to Solution.
07-09-2006 08:34 AM
Hi Arvind,
This Service Level can be changed per CSQ. Have a look;
Modifying an Existing CSQ
You can modify existing CSQs. If you make dynamic configuration changes that affect the order in which agents receive ICD calls, the changes take effect when all agents affected by the changes have left the Ready state. If no agents are in the Ready state when you modify the CSQ, the changes take effect immediately.
To modify an existing CSQ, complete the following steps.
Procedure
--------------------------------------------------------------------------------
Step 1 From the CRA Administration menu bar, choose Subsystems > ICD.
The ICD Configuration web page opens.
Step 2 On the ICD Configuration navigation bar, click the Contact Service Queues hyperlink.
The Contact Service Queues area opens.
Step 3 In the Name list, click the CSQ that you want to modify.
The first Contact Service Queue Configuration area page opens.
Step 4 Modify the CSQ as necessary.
In the "Service Level field", enter the target maximum time a call is queued before it is connected to an agent.
In the Service Level Percentage field, enter the target goal for percentage of contacts that meet the service level.
For example, a call center that has a service level of 20 and a service level percentage of 80 percent has a goal of answering 80 percent of its calls within 20 seconds.
Step 5 Click Update to apply the modifications.
From this doc;
Hope this helps!
Rob
Please remember to rate helpful posts........
07-09-2006 08:34 AM
Hi Arvind,
This Service Level can be changed per CSQ. Have a look;
Modifying an Existing CSQ
You can modify existing CSQs. If you make dynamic configuration changes that affect the order in which agents receive ICD calls, the changes take effect when all agents affected by the changes have left the Ready state. If no agents are in the Ready state when you modify the CSQ, the changes take effect immediately.
To modify an existing CSQ, complete the following steps.
Procedure
--------------------------------------------------------------------------------
Step 1 From the CRA Administration menu bar, choose Subsystems > ICD.
The ICD Configuration web page opens.
Step 2 On the ICD Configuration navigation bar, click the Contact Service Queues hyperlink.
The Contact Service Queues area opens.
Step 3 In the Name list, click the CSQ that you want to modify.
The first Contact Service Queue Configuration area page opens.
Step 4 Modify the CSQ as necessary.
In the "Service Level field", enter the target maximum time a call is queued before it is connected to an agent.
In the Service Level Percentage field, enter the target goal for percentage of contacts that meet the service level.
For example, a call center that has a service level of 20 and a service level percentage of 80 percent has a goal of answering 80 percent of its calls within 20 seconds.
Step 5 Click Update to apply the modifications.
From this doc;
Hope this helps!
Rob
Please remember to rate helpful posts........
08-08-2008 05:12 AM
Dear Rob,
I have a question about the Service Level configuration:
The Service Level parameter is the target maximum number of seconds a call is queued before it is connected to an agent.
Does it mean that the time the call spends ringing in the agents' phone is not taken into account in this parameter?
If a call is waiting for 5 seconds, then an agent is Ready but doesn't answer in 15 seconds and the call is queued again for another 7 seconds, then another agents becomes ready and answers in 2 seconds. What is the amount of time taken into account for this parameter? Is it 5 + 7? Only 5?
Thanks for your kind help.
Best regards
Amaia
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide