When no agents are logged on contactac certer, script trasfer calls to an external phone (PSTN) Are there any possibility to know if transferred call has been answared?
The platform are composed for ICM 7.5 and IP IVR 7.0.
Thank you in advance
I could do it in either, via script or via label, but in both ways, I do not know how know the result of the transfer.
What do you recommend me?
You can use the "Call Consult Transfer" step for this purpose. This step also provides you the ability to pass DTMF once the call has been answered:
From the scripting guide:
"Use the Call Consult Transfer step to perform a supervised transfer. The step can be used to outpulse DTMF digits once the destination answers. The transfer will be completed on the destination answering the call and DTMF outpulsing complete (if DTMF digits are specified)."
I have attached a very basic script with this stes used in it (no variables have been populated).
Please note that the above mentioned procedure is for transferring using an IVR script.
Thank you for your answer...
I tried to transfer calls with consult call transfer node, but I have two problems:
First, called person seeing the number of the CTI port as calling number, instead of original calling party number, and second, in WebView reports, transferred calls appears as abandoned calls.
How I can avoid these disadvantages?
You might find this post useful: https://supportforums.cisco.com/thread/2058072
Please note that currently UCCX behaves in the following way for a consult transfer:
Currenlty, there is no option to display the original calling number during the transfer from UCCX.
Chris has mentioned something about do transfer with sending a label, but in this case, I do not know how to know if transferred call has been answered or not.
Do you know how a could get this information?
Like i mentioned, the Consult Call transfer lets you have the functionality that you require. If the call is answered, the contrl will go to the "Successful" branch of the step.
Yes, but in spite of I mark call as "handled" For ICM is abandoned like I can see in webWiew reports.
And is not possible show original calling numbers in alerting state.. Therefore I should consider other option.
Sen a label at CUCM could be interesting but only if I can check out if call has been answered..
Sent from Cisco Technical Support iPhone App