we are using a IPC to comunicate CAD with a third party application. We are using IPC Set Variable Action, but it seem that it doesn't work correctly. Indeed of we have tried IPC Make Call Action and it works fine. I'll try to explain myself as clear as I could:
Although we send the xml code, the variable is not modified.
Could anybody help us with this?
Is the agent able to modify this data within CAD directly? If not, you need to allow this through CDA on the Enterprise Data node of the workflow group. This is covered on page 67 of the Cisco Desktop Administrator User Guide for CAD 6.6 for Unified CM.
we have solve it setting the variable as follows:
Using both fields concatenated with a pipe.
If this works please rate it.
Thank you very much for the tip. It works using the following format:
We are experiencing another issue, which is related with the refresh of Layout fields in CAD.
When the variable is changed using the IPC Set Variable, it's value is not refreshed in CAD. Have you solved this issue?
Thank you and regards
you are experiencing the correct functionality. You will only view variables refreshed when you transfer the call to a new destination (for example an other agent).
Varibles values never be refreshed in your own desktop.
If you found this post helpful, please rate it.
Do not change this value?
My scenario is;
call comes agent (callvariable2 set english by IVR), Agent start a conference call with authentication IVR.
when the call conference then The value must be replaced new value