10-31-2019 02:02 PM
We are looking at moving to Jabber softphone for our agents and supervisors. I have one supervisor switched over attempting silent monitor her staff (on Cisco 8845s). When she attempts to silent monitor she hears:"call cannot be completed as dialed" and Finesse displays "Unable to Silent Monitor at this time. Contact your system administrator."
I have confirmed her phone is associated to our jtapi application user which has the Allow Call Monitoring, Recording, Control of All Device..., and CTI enabled. It also has Built in Bridge on.
Our environment is UCCX 11.6.2 HA, Jabber for Windows 12.5.0, CUCM 12.0.1
Thank you for your time.
Amos
Solved! Go to Solution.
10-31-2019 03:06 PM
10-31-2019 03:06 PM
11-01-2019 08:13 AM
11-01-2019 02:53 AM - edited 11-01-2019 02:54 AM
Hi,
Try adding those 2 roles also:
Although they might not documented (didn't check) but from experience if you are lacking those, you will probably have a JTAPI issues with 88XX phones, and it might be your issue.
Also, I didn't see that you mentioned it, but did you check under the supervisor DN that the "Monitoring Calling Search Space" setting is set to a CSS in your CUCM that can "see" the agent phones that the supervisor is trying to monitor? If not, that's the main problem. (Edit: Oh, I see that Anthony already mentioned that)
11-01-2019 08:15 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide