11-25-2013 05:54 PM - edited 03-14-2019 12:47 PM
Hi
Someone knows, How to configure into the script ICM a node to dial a number or extension?
In theory with a label node, but how to make the configuration
Thanks
Solved! Go to Solution.
11-26-2013 11:28 AM
in the icm script, use the "label" node.. set it to dynamic and write the extension/phone number between ""
the call will then be sent back to cvp and you can forward it to cucm/gw
Sent from Cisco Technical Support Android App
11-26-2013 01:21 AM
Hi,
using the ICM Config Manager. Tools > List Tools > Label List.
You might want to configure a label for each peripheral aka routing client (you most likely have one AG/CUCM and a pair of VRU peripherals). Label = phone number. Label type = normal. Don't toch the rest of the form.
In your script, use the Label node, and add a label for each peripheral (this ensures that wherever the call is, it will get the label).
G.
11-26-2013 11:28 AM
in the icm script, use the "label" node.. set it to dynamic and write the extension/phone number between ""
the call will then be sent back to cvp and you can forward it to cucm/gw
Sent from Cisco Technical Support Android App
11-26-2013 04:56 PM
Excellent it worked !!!
Thank you very much to both
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide