11-10-2010 05:57 PM - edited 03-14-2019 06:52 AM
I have a 9971 and I'm trying to login to cad 7.0(1) and the error is The device is restricted. Cannot login. The device is set to allow cti control. I had a 7965 which worked with no errors. I did have to create a special profile for this phone to enable fcp but aside from that nothing different. Thanks in advance.
Solved! Go to Solution.
11-10-2010 07:34 PM
Hi Roger
I assume UCCX version is 7.0(1), if this is the case then 99XX model phones are not tested with 7.x version and they might not work. (by the way i tried in my lab server and CAD login fails with the same error)
These phones are tested with UCCX 8.x version
Hope this helps
Regards
Anuj
11-10-2010 07:34 PM
Hi Roger
I assume UCCX version is 7.0(1), if this is the case then 99XX model phones are not tested with 7.x version and they might not work. (by the way i tried in my lab server and CAD login fails with the same error)
These phones are tested with UCCX 8.x version
Hope this helps
Regards
Anuj
11-11-2010 04:57 PM
Hi Anuj, thank you for the info. We are using uccx 7.0(1) and I do have plans to move to v8 so that is good news that I can use the 9971, thanks again.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: