cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
349
Views
0
Helpful
2
Replies

Tranlation Routing Aspect ACD to Cisco CVP

CiscoKidsFriend
Level 1
Level 1

Is there some better documentation and examples describing procedures for translation routing from an Aspect ACD back to Cisco CVP. I have a PDF called "Cisco ICM Software Supplement for Aspect.pdf", and I am already able to TR from CVP to Aspect, but the other direction is harder to figure out.

2 Replies 2

fmeetz
Level 4
Level 4

There are some troubleshooting documents available for various Aspect issues. Check out if your issue falls in any of these.

http://cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00800b4792.shtml

http://cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a0080181c32.shtml

boyd.lynn
Level 1
Level 1

In order to use TRs from the Aspect to CVP you have to have a range of DDIs that will deliver the call to the CVP from the Aspect.

i.e 95554441 to 95554445

You also need a CCT that will dial out using the DDI returned from the ICM in one of the Aspect Variables A-E (You can choose which one)

i.e CCT 300 and Variable B

In the TR configuration with Aspect as the routing client the labels should be configured as

300%295554441

300%295554442

300%295554443

300%295554444

300%295554445

where %2 means Variable B

A=1, B=2 etc

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: