cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
739
Views
3
Helpful
4
Replies

Two CVP Questions

adignan
Level 8
Level 8

1. Has anyone used a CSM for a content switch with CVP?

2. Does anyone have a working CSS config from a CVP implementation they can share?

4 Replies 4

tapk5
Level 3
Level 3

For CVP 4, CSS can only load balance media servers, We did have a deployment for CSS, the config is very basic.

ip route 0.0.0.0 0.0.0.0 142.125.119.65 1

!************************* INTERFACE *************************

interface 2/2

admin-shutdown

!************************** CIRCUIT **************************

circuit VLAN1

ip address 142.125.119.81 255.255.255.192

ip virtual-router 1 priority 230 preempt

ip redundant-vip 1 142.125.119.84

!************************** SERVICE **************************

service mediaserver1

ip address 142.125.119.76

type redirect

port 80

domain 142.125.119.76

keepalive type http

keepalive maxfailure 1

keepalive uri "/iisstart.htm"

keepalive retryperiod 4

active

service mediaserver2

ip address 142.125.119.204

type redirect

port 80

domain 142.125.119.204

keepalive type http

keepalive maxfailure 1

keepalive uri "/iisstart.htm"

keepalive retryperiod 4

active

!*************************** OWNER ***************************

owner CVP

content media

vip address 142.125.119.84

protocol tcp

port 80

url "/*"

add service mediaserver1

add service mediaserver2

active

!*************************** GROUP ***************************

group medisservers

add destination service mediaserver1

add destination service mediaserver2

vip address 142.125.119.84

active

Hope this helps.

Wei

This is very cool, I had to do this at my new project, so this is very helpful!!

Thanks!

Chad

There is a pretty good guide in the CVP Install and Upgrade Guide for CVP 3.1 on CSS, I've used it pretty much line by line.

david

will give it a read through, CVP has been a fun one to tackle because it touches so many technologies!

Chad