We are going to relocate Side B of our UCCE 11.6 system to another data Center.
System Consist of 2 VoiceGW,3 VXML GW,7 CVP,5 PG(CM,VRU),2 AW,Rogger B,Finesse,CUIC,CCMP.
Is there any Documentation available for it ?
or any important things to consider.
Please let us know if there any changes in the IP Address when you move to the new DC?
if you are keeping the IP address the same, then you may
Ensure that you have network connectivity, power backup, rack spaces are in place
Take the back up of all the system components (VoiceGW,3 VXML GW,7 CVP,5 PG(CM,VRU), AW,Rogger, Finesse,CUIC,CCMP). (VM clones if it is a possibility)
Perform a graceful shutdown of the system (follow the Cisco IPCC Startup/Shutdown/Restart Procedures - Cisco)
relocate the server and follow the start-up process as mentioned in the above doc.
if there are any changes in the IP details,
- UC VOS (Changing IP Address and Hostname for Cisco Unified Communications Manager and IM and Presence Service, Release 10.x - IP Address and Hostname Changes [Cisco Unified Communications Manager (CallManager)] - Cisco )
**** Rate the post if you find it useful.. accept the solution if it resolves your issue.
Another thing to consider is how long you will be in simplex mode. It is possible to have sync/replication problems depending on call volume and time to restore side B. If it drags on, it may be necessary to have Cisco/partner manually sync the loggers and HDS. Usually a normal UCCE 4000 rogger should make it through a long weekend in simplex, but you should be able to verify with ICMDBA and RTTEST. Good luck!