06-07-2011 08:10 AM - edited 03-14-2019 08:02 AM
Hi Members,
We are using the SIP Dialer in the UCCE Environment and i get the below message in the MR PIM.
My Dialer status bar showing as BADialer-R[CM-A][CTI-A][MR-X][SIP-A]
07:00:18:581 PG2A-pim1 Peripheral 5004 sending OPC PIM_OK_ACK acknowledgment for command PIM_CONFIGURE_REQ (TransID=0).
07:00:18:581 PG2A-pim1 Attempting to connect to MR application at IP address 10.110.10.26 port 38000.
07:00:29:644 PG2A-pim1 Attempting to connect to MR application at IP address 10.110.10.26 port 38000.
07:00:40:707 PG2A-pim1 Attempting to connect to MR application at IP address 10.110.10.26 port 38000.
07:00:49:582 PG2A-pim1 ProcessPIMSetIdleReq: Peripheral 5004 going idle.
07:00:52:582 PG2A-pim1 Peripheral 5004 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=-1).
07:00:52:582 PG2A-pim1 Trace: Ignoring idle request for other side to peripheral -1 side=0
I get the below logs in the OPC process of the MRPG
07:00:18:581 PG2A-pim1 Peripheral 5004 sending OPC PIM_OK_ACK acknowledgment for command PIM_CONFIGURE_REQ (TransID=0).
07:00:18:581 PG2A-pim1 Attempting to connect to MR application at IP address 10.110.10.26 port 38000.
07:00:29:644 PG2A-pim1 Attempting to connect to MR application at IP address 10.110.10.26 port 38000.
07:00:40:707 PG2A-pim1 Attempting to connect to MR application at IP address 10.110.10.26 port 38000.
07:00:49:582 PG2A-pim1 ProcessPIMSetIdleReq: Peripheral 5004 going idle.
07:00:52:582 PG2A-pim1 Peripheral 5004 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=-1).
07:00:52:582 PG2A-pim1 Trace: Ignoring idle request for other side to peripheral -1 side=0
I get the below logs in my badialer node
07:00:03:238 dialer-baDialer Trace: CSipUATelephonyServer::HandleKeepAliveTimeoutTimer: HB ack received
07:00:03:691 dialer-baDialer Trace: (DD) **** Media Routing PIM is not Connected ****
07:00:03:691 dialer-baDialer Trace: (FAILOVER) SENT:HeartBeatRequest to CTI Server; InvokeId[478572]
07:00:03:691 dialer-baDialer Trace: (FAILOVER) Received:HeartBeatConf from CTI Server; InvokeId[478572]
07:00:04:644 dialer-baDialer Trace: (CLMGR) Agent event, agent: [14836], ext: [2726], state: [RESERVED]
07:00:04:691 dialer-baDialer Trace: (DD) **** Media Routing PIM is not Connected ****
07:00:05:691 dialer-baDialer Trace: (DD) **** Media Routing PIM is not Connected ****
07:00:06:691 dialer-baDialer Trace: (DD) **** Media Routing PIM is not Connected ****
07:00:07:691 dialer-baDialer Trace: (DD) **** Media Routing PIM is not Connected ****
07:00:07:738 dialer-baDialer Trace: CSipUATelephonyServer::HandleKeepAliveTimer
07:00:07:738 dialer-baDialer Trace: SipISH-onSuccess:
SipResp: 200 cid=a423031e-f06d0254-ba215c44-0157ca41 tid=19248b2a632cbc68 cseq=OPTIONS / 1 from(wire)
07:00:08:238 dialer-baDialer Trace: CSipUATelephonyServer::HandleKeepAliveTimeoutTimer: HB ack received
Can someone helpme why i would get these messages.
Regards,
Senthil.
06-08-2011 03:23 PM
This indicates that MR PIM1 is unable to establish a network connection to your dialer. Make sure the MR PIM's are configuring with the correct hostnames or IP addresses for your dialers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide