11-04-2015 05:31 AM - edited 03-15-2019 06:13 AM
Hello, we are running UCCX 10.6 with Finesse and have wrap-up reasons enabled. We also have automatic work and wrap-up time enabled on the CSQ.
We are wondering if it's possible to go back into the ready state automaticly after entering a reason code. Right now agents have to wait for the automatic work time to end for them to go back to ready state automaticly.
If we disable wrap-up time on the CSQ we still don't go back to the ready state after entering the wrap-up reason. I we disable automatic work we obviously don't get prompted for the wrap-up rason.
Thanks for the help.
11-04-2015 05:51 AM
You will need to disable the Automatic Work as well in order to for the agents to go immediately in Ready state once the call had been ended. In case if agent us part of multiple CSQs then you will need to disable wrap-up time and Automatic Work on the applicable CSQs. Also make sure Automatic Available is set to Enabled at the Resource configuration.
Note : There is no way possible that once agents had selected the wrap up code Finesse Agent Desktop can automatically got to Ready state. It will only happen at the end of work timer expiry.
Regards
Deepak
- Do Rate Helpful Posts -
06-27-2016 03:45 AM
Having just upgraded a customer from UCCX v9 to 10.6 and found this same undocumented issue, I am not impressed as it is an undocumented change in the behaviour of the system. Our customer is not impressed by this change in behaviour.
Can someone confirm if there is any way with UCCX 10.6 and agents using Finesse, to have the agent go into work for a defined period of time, and then, once the agent selects a wrap-up code, put the agent back into Ready state?
This was what happened with CAD in v9 and the way almost all of our customers are set up.
If it is not possible, I would be grateful if someone could point me to the relevant Cisco document which explains this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide