02-08-2013 12:28 PM - edited 03-14-2019 11:13 AM
Dears,
I have upload the Recording file. and its working internal and External Calls perfectly. But can you help me when Caller Dial Digit 0, 1 ,2 ,3 any one and call can transfer to destination Number.
I want to know How can i Assign Digits 0,1,2,3 to any internal Ext.
Please help me ASAP.
02-08-2013 06:37 PM
Hi Khalid Khan,
Why don't you use the Auto Attendent (aa.aef) which can be used for
- Dial By Extension
- Dial By Name
Hope this helps.
Anand
Pls rate helpful posts !!
02-08-2013 08:39 PM
It sounds like you have a Menu and when the caller presses a key for one of the menu options, you would like to transfer the caller. Is that correct?
If so, then you will need a step call Call Redirect and it can be found within the Call Contact step Palette on the left of the Editor. You will drag it from the palette on the left, to the Menu step, and under the branch you wish to use it. Now, Under the General palette, drag an End step under your Call Redirect step. And you will do this again, for each menu option that will result in a transfer. Edit each of the Call Redirect steps, and type in the extension number, in double quotes, into the Destination field. E.g., If your extension is 1000 you type "1000"
If you had a Menu with three options: 1, 2, and 3, your script will look like this:
Menu (--Triggering Contact--, YourRecording)
Option 1
Call Redirect (--Triggering Contact-- to "1000")
Successful
Busy
Invalid
Unsuccessful
End
Option 2
Call Redirect (--Triggering Contact-- to "2000")
Successful
Busy
Invalid
Unsuccessful
End
Option 3
Call Redirect (--Triggering Contact-- to "3000")
Successful
Busy
Invalid
Unsuccessful
End
Timeout
Unsuccessful
Whether or not the transfer works, will be based on whether or not your CTI Port Group has a CSS which can reach the Destinations you're transferring to.
Good luck and happy scripting.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.
02-09-2013 10:36 PM
Dear I have Done it ,
Thanks for support, Now Internal calls can attend and transfer is OK.
But from External calls can reached to direct line Number and Recording is started but when we press 1 or 2 or 3 its cannot reached to Ext.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide