01-31-2016 01:32 AM - edited 03-15-2019 06:14 AM
Hi all,
I'm very new to UCCX reporting, and I'm only exploring the database now as we're experiencing a significant problem of large number of inbound calls (25%) not being placed in the queue that they're supposed to and 'ringing out'.
Our provider has suggested that it's BT's fault, but I can see the 'failed' calls in the ContactCallDetail table, with a contact disposition of 15.
The database schema groups disposition 15 within Rejected calls.
Can anyone explain to me, in lay man's terms that non-technical management will understand, what is happening to these calls?
Many thanks for your help.
Solved! Go to Solution.
02-01-2016 01:24 AM
Below links will help you in understanding all the reports available within CUIC and their description in detail. Go through them to understand what all reports are there and about the fields they contain
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_11_0/user/guide/UCCX_BK_U36B58A5_00_uccx-report-user-guide-11.html
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_11_0/user/guide/UCCX_BK_UA808DBF_00_uccx-historical-reporting-guide-11.html
As far as this particular issue is concerned wherein 25% inbound calls are failing and if you think they are not legitimate, then the best thing is to analyze CCX Engine and Jtapi logs for some of those calls to exactly find out the reason.
It will be good to contact TAC for this and take it further with them.
Regards
Deepak
02-01-2016 04:56 AM
Tend to agree with Deepak. Probably easiest to contact TAC and get them to assist with troubleshooting.
If I was taking a look at the system I'd first take a look at the list of services under 'Control Centre' in the 'Cisco Unified CCX Servicability' window (check the top right dropdown and choose this and press Go). I'd guess that one of the subsystems is marked as 'Partial Service' and one of the services as possibly 'Out of Service'.
You'd then be needing to review the MIVR Engine logs via RTMT but given you're only just coming up to speed on the system, get TAC to give you a hand.
01-31-2016 07:06 PM
Take a look at the stock report 'Aborted Rejected Call Detail Report'. Do the calls show up in this report?
02-01-2016 12:01 AM
Thank you, I didn't even know this report existed - no training on this system as yet.
Yes; the calls appear, with the description "Reject: Setup Failed" I've found some more documentation through googling, which gives further information on this error - JTAPI Subsystem Accept fails.
This is the Java API I've read? What would most likely be causing this issue? I'm asking as I won't be the one investigating, but trying to speed up our provider...
Thanks again for your response.
02-01-2016 01:24 AM
Below links will help you in understanding all the reports available within CUIC and their description in detail. Go through them to understand what all reports are there and about the fields they contain
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_11_0/user/guide/UCCX_BK_U36B58A5_00_uccx-report-user-guide-11.html
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_11_0/user/guide/UCCX_BK_UA808DBF_00_uccx-historical-reporting-guide-11.html
As far as this particular issue is concerned wherein 25% inbound calls are failing and if you think they are not legitimate, then the best thing is to analyze CCX Engine and Jtapi logs for some of those calls to exactly find out the reason.
It will be good to contact TAC for this and take it further with them.
Regards
Deepak
02-01-2016 04:56 AM
Tend to agree with Deepak. Probably easiest to contact TAC and get them to assist with troubleshooting.
If I was taking a look at the system I'd first take a look at the list of services under 'Control Centre' in the 'Cisco Unified CCX Servicability' window (check the top right dropdown and choose this and press Go). I'd guess that one of the subsystems is marked as 'Partial Service' and one of the services as possibly 'Out of Service'.
You'd then be needing to review the MIVR Engine logs via RTMT but given you're only just coming up to speed on the system, get TAC to give you a hand.
02-01-2016 06:29 AM
The provider has come back to us and admitted they're not sure what's going on, they've submitted to TAC and it's on as a P1.
Thanks again for your patient responses for a newbie! Very much appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide