08-18-2014 12:32 PM - edited 03-15-2019 06:01 AM
Hello,
I had come accross from what I remember being a proper web address that shows the status of HA UCCX. The output was simillar to an xml file being opened in a web brower. It would show if it was active or standby.
It may look something like;
I.e https:\10.10.10.10\failoverstatus\
If anyone knows of this address please let me know.
Thanks,
AK
Solved! Go to Solution.
08-20-2014 09:59 AM
Hi
The URL is: http://<UCCXIP>/uccx/isDBMaster
For this to work (last time I checked) you had to browse to that URL from the IP address you configure in the 'wallboard server name' config setting in AppAdmin/Tools/Real Time Snapshot Writing Configuration.
Regards
Aaron
Please rate helpful posts..
08-20-2014 07:51 AM
I have never seen anything like this we always go to CLI to get the information. I am not even sure that the List Server portion of UCCX shows the active server after failover.
You would think that Cisco would have something like this.
08-20-2014 09:59 AM
Hi
The URL is: http://<UCCXIP>/uccx/isDBMaster
For this to work (last time I checked) you had to browse to that URL from the IP address you configure in the 'wallboard server name' config setting in AppAdmin/Tools/Real Time Snapshot Writing Configuration.
Regards
Aaron
Please rate helpful posts..
08-20-2014 12:55 PM
Thanks Aaron,
is
"For this to work (last time I checked) you had to browse to that URL from the IP address you configure in the 'wallboard server name' config setting in AppAdmin/Tools/Real Time Snapshot Writing Configuration."
Found in Desktop administrator?
Thanks,
AK
08-21-2014 01:51 AM
No - AppAdmin - the CCX administration pages.
Aaron
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide