I have a client that wants to apply some QoS to UCCX keepalive messages between servers in an HA pair. I've been trying to figure out what protocol or port they should prioritize, but am having difficulty identifying anything in documentation.
Feb 12 00:01:21.599 SGT %MCVD-LIB_TPL-7-UNK:source=com.hazelcast.cluster.ClusterService, message=[x.x.x.x]:5900 [UccxCvdCluster-1289912074000] Added Address[x.x.x.x]:5900 to list of dead addresses because of timeout since last read
Feb 12 00:01:21.600 SGT %MCVD-LIB_TPL-7-UNK:source=com.hazelcast.cluster.ClusterService, message=[x.X.x.x]:5900 [UccxCvdCluster-1289912074000] No heartbeat should remove Address[x.x.x.x]:5900
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...