I create UCCX auto attandend its working fine from internal calls can reached to ext after recording. But External Calls can reached to direct line recording but after that when press 1 , 2 the call cannot reached to Ext. can any one help me to solve it.
Solved! Go to Solution.
I have add all configuration of GW. there is to much Dial peer But for UCCX we are using 7337 i Bold that config.
please check and give me full salution I will be thanks full to you,
we have two GW and i upload all conf for both GWs.
dial-peer voice 7337 voip
--More-- signaling forward unconditional
session protocol sipv2
session target ipv4:
session transport tcp
Note : All IP in this GW are Private IPs.
Add incoming called-number 7337 to dial-peer 7337.
Also, it is using H323 DTMF method on sip dial-peer, you need to use sip DTMF method such as dtmf-relay rtp-nte.