02-02-2017 08:01 AM - edited 03-15-2019 06:27 AM
Hello,
We use the following systems.
Call Manager 9.1.2
UCCX 10.6.1
Is it possible to use whisper to introduce a call to a user using a UCCX script?
We would like to play a wav file to a user to identify that the call has been routed to them for a particular reason. The routing we have worked out but we are unable to work out how we put a whisper in front of it.
Has anyone done this and are able to offer instruction or guidance?
Thanks in advance
02-02-2017 12:19 PM
Yes You can.
Its simple and can be done in UCCX scripting.
look at below for more detail
https://supportforums.cisco.com/discussion/9350821/icd30-whisper-agent-call-connected#1043973
Its basically in your select resource step you don't connect the call to Agent but instead keep him selected, place whisper call and once done. connect the customer to agent.
08-29-2019 11:59 AM
Hello friends,
Has anyone been able to implement the announcement whisper before the call is connected to the agent? I've been trying this for a few days and to no avail.
02-06-2017 07:22 AM
Interested to know how you get on Ben, been trying to get this working myself using the method Chintan linked to. I have the steps working fine,. just the agent does not hear the desired whisper prompt.
02-07-2017 05:09 AM
Hi Jon, would be interested in getting a copy of your script if you would not mind supplying it?
Might get us a little further than we are! Thanks in advance.
02-07-2017 06:38 AM
Hi Ben
It's pretty much a carbon copy of the script linked to in this thread, I just merged it into an existing script,.
https://supportforums.cisco.com/discussion/9350821/icd30-whisper-agent-call-connected#1043973
I did actually open my own discussion on the issue which shows a small grab of the steps:
https://supportforums.cisco.com/discussion/13218966/whisper-announcement-agent-not-hearing-prompt
06-14-2017 04:42 AM
Hi Jon.
Did you get this to work,playing the prompt to the agent ?
Henrik
08-29-2019 11:58 AM
Hello friends,
Has anyone been able to implement the announcement whisper before the call is connected to the agent? I've been trying this for a few days and to no avail.
02-07-2017 05:26 AM
BTW, the whisper prompt should be played to the contact which you get as result of call to the agent extension and not to the triggering contact.
02-07-2017 06:29 AM
Yes,. I do have the contact selected instead of the triggering contact.
11-04-2020 11:34 AM
I am running into the same problem, it can't get the agent as a contact. Even after placing a call to the agent ext.
11-04-2020 12:42 PM - edited 11-04-2020 12:56 PM
Are you using the same Contact variable in your Place Call to the Agent as you're using in your Play Prompt to the Agent?
EDIT: Never mind, I saw your screenshot in another post and you are using the same Contact.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide