03-16-2010 07:59 AM - edited 03-14-2019 05:26 AM
Is is possible to change the calling name prior to transfering the call to an extension. We are in the process of changing our script to send some calls to non agents and we could like for them to be able determine from the Calling Name what the call is for.
Thanks,
Joe
Solved! Go to Solution.
03-16-2010 08:10 AM
Hi
Not sure if you can do it via scripting (anyone?) but the other solution would be to set up a CTI Route Point with a recognizable name (e.g. 'Department 1'). Forward that to the hunt pilot, and then send your calls to the CTI RP.
Call should then show up as 'Forward for Department 1'.
Regards
Aaron
Please rate helpful posts...
03-16-2010 08:10 AM
Hi
Not sure if you can do it via scripting (anyone?) but the other solution would be to set up a CTI Route Point with a recognizable name (e.g. 'Department 1'). Forward that to the hunt pilot, and then send your calls to the CTI RP.
Call should then show up as 'Forward for Department 1'.
Regards
Aaron
Please rate helpful posts...
03-16-2010 08:41 AM
You cannot do it via scripting. The script does not support the calling name feature.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide