I am trying to debug a simple script. Here are the steps -
1. SimpleRecognition step -- Executes succesfully with grxml
2. Voicebrowser step - result no-input with grxml.
When I see the Nuance server logs this is what I found
Apr 13 13:17:26.72|5504|0|6001|OSR Plugin|SWIrecRecognizerCompute returned with incomplete status \= 2|UCPU=15|SCPU=0
Apr 13 13:17:26.83|5504|0|6001|OSR Plugin|SWIrecRecognizerCompute returned with incomplete status \= 2|UCPU=15|SCPU=0
Apr 13 13:17:26.94|5504|0|6001|OSR Plugin|SWIrecRecognizerCompute returned with incomplete status \= 2|UCPU=15|SCPU=0
Apr 13 13:17:27.05|5504|0|6001|OSR Plugin|SWIrecRecognizerCompute returned with incomplete status \= 2|UCPU=15|SCPU=0
I am attaching the OSServer.cfg and the nuance server logs.
Do I need to change any configuration ?
Thanks for the help.
Missed to mention a point.
When I skip step 1 then the voice browser step executes successfully without any problem.
Seems like there is a problem after the first invoke of MRCP.
Did you create MRCP ASR Dialogue Groups? (Under UCCX Admin->Subsystems->MRCP ASR)
And also did you associate this MRCP Dialouge group under Advance trigger Information for the Route point created for this UCCX application.
Click on the UCCX Admin->Application->access the aove application-.Click on the Trigger->Advance Trigger Information->Override Media Termination, say yes here->And select the MRCP dailouge group crated above and associate, deassociate the default CMT here.
Save the above settings, refresh the applications \ scripts page and test again.
Hope it helps.
Please rate helpful posts !!
Hi Anand. I'm working with Ram on this project.
Yes, we have set up the MRCP ASR Dialog Group and set it on the trigger previously. So, unfortuntely no luck there.
I'm open though to other ideas! I see a request below to post the relevant part of the script. I'll do that momentarily.
Ok, and what happens if the script executes the voice browser step only, using the same VXML document?
Are you sure you are using a logically valid grammar there? Can you perhaps post it?
Sent from Cisco Technical Support iPad App
Ok to make the steps simple. I have copied the previous voicebrowser element which executed successfully and pasted.
Here is the scenario :
step 1. voice browser - executes successfully
step 2. copied the above voice browser - no-input occurs.
The MIVR logs shows
8787355: Apr 16 07:31:28.245 MDT %MIVR-SS_MRCP_ASR-7-EXCEPTION:com.cisco.wf.media.driver.DriverException: ERROR Stream::injectDtmf - failed with appId=1, confId=57259, partyId=4
the above error is shown for each input at step 2. Please find the attached mivr logs.
I've got a strange feeling that even though the IVR script continues, the Nuance server somehow expects more input within/after the first step.
Or it might be a nasty bug as well (either UCCX or Nuance).
Well, I am sorry but I cannot help you here - the only workaround I would definitely consider is to wrap all necessary actions into a single VoiceXML browser step (yes, I can hear you laughing).
I really appreciate you and anand for looking into my issue and helping me.
Unfortunately I am confused here to contact Cisco or Nuance.
Let me see what happens to this.
Hi, I am really sorry about that.
What I know there was a bug in UCCX 8.02 and they made me to install a patch. But you seem to have quite a different version.
I would talk to Cisco first.
Currently I dont have the exact version of CUCM. But the
UCCX version is
active UCCX version: 126.96.36.19902-22
inactive UCCX version: 188.8.131.5200-37