cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
574
Views
0
Helpful
2
Replies

upgrade plan from UCCX 10.5(1) to 10.6(1)SU2

ccg-collab1
Level 2
Level 2

Hi All,

We have a customer that we need to upgrade their UCCX 10.5(1) to version 10.6(1). Upon checking, the upgrade will just be linux to linux wherein i think no cop file is needed.  However, i checked the base version of UCCX 10.6(1) and saw below files/information:

With this, we just want to make sure that we will do the upgrade properly. Can we just upgrade the UCCX version 10.5(1) to 10.6(1)SU2?

or

We need to upgrade first to 10.6(1) and install a file first before upgrading to SU2 of 10.6?

Appreciate your advise. 

Thank you so much.

2 Replies 2

solomonluke
Level 4
Level 4

You can check the CCX Software Compatibility Matrix

http://docwiki.cisco.com/wiki/Unified_CCX_Software_Compatibility_Matrix_for_10.6(1)SU2

According to the Compatibility Matrix you can upgrade to 10.6(1)SU2 from 10.5(1)SU1

Hope this helps!

Solomon

martyn.rees
Level 4
Level 4

What version of 10.5(1) are you on? You will need to be on SU1 in order to be able to go to 10.6. Once you are on SU1 of 10.5 then you can go straight to 10.6(1)SU2.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: