Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
532
Views
0
Helpful
2
Replies

Using more than one telephony trigger in UCCX

Go to solution
Marc De Serio
Beginner
Beginner

‎01-25-2013 05:39 AM - edited ‎03-14-2019 11:09 AM

Hello,

I have UCCX 8.02 SU4 HA over WAN.  The primary box is working together with the secondary CUCM.  The secondary UCCX is in another office with the primary CUCM.  I want the script to be able to be accessible from two triggers connected to two DNs, one at each of the sites.  Is there a way to configure this so that if one DN is unavailable (Site is down), the call tries the other DN?

Thanks.                  

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Gergely Szabo
VIP Alumni
VIP Alumni

‎01-25-2013 05:50 AM

Hi,

yes, you can use the Call Forward on CTI Failure (or Call Forward No Answer/Busy) setting of the line of the CTI Route Point.

G.

View solution in original post

0 Helpful