03-15-2012 10:33 AM - edited 03-14-2019 09:32 AM
Hi,
I can not to access the web adm of the CCX page.
How Can I to reset the web page password ?
thanks.
03-15-2012 11:17 AM
Change the password of the admin end user in CUCM.
Chris
03-15-2012 11:47 AM
Hi Chris,
I ´m using LDAP.. I changed in CUCM, but it didn´t work.
...
03-15-2012 11:51 AM
Are you sure you have the correct username?
The only other way to gain access to reset it is to use the CET tool, which on Linux based system you can download using the following link:
https://x.x.x.x:8443/uccxinstalls/CetTool.exe
HTH,
Chris
03-15-2012 12:18 PM
Ok, but the softwae ask me the login and password.. What Can I to do?
I have just OS administration access with login and password..
thanks
03-15-2012 10:21 PM
Hi,
Try this one,
set uccx appadmin administrator
Note: Run this command to set the administrators for configured Cisco Unified CCX system only. For new install system, you must login with the platform login password specified during installation.
Reference:
Hope it helps.
Anand
PLease rate helpful posts..
03-16-2012 06:23 AM
Is there not this command in the syntax...
03-16-2012 06:27 AM
Example
admin:set uccx appadmin administrator username
UCCX appadmin adminstrator is set to username
Note: You cannot assign Administrator capability to a user ID which is the same as the application administrator user ID created during the Unified CCX installation. If you assign Administrator capability to such a user ID, a Command failed error message is displayed on the console.
Thanks,
Anand
03-16-2012 10:28 AM
Regards,
Rohit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide