07-14-2017 02:01 AM
ODL couldn't correctly update the topology for ASR9K link. In day 1, the topology of ASR9k was ok. But in Day 2, the link of ASR9k changed, but ODL couldn't get the link info correctly. So far, ODL can connect ASR9K. What's the possible reason for this topology issue?
Solved! Go to Solution.
08-03-2017 07:09 AM
Hi Xing,
sorry for the delay in responding
Beryllium-SR2 is pretty old, as is XR6.0.2. It might be worth looking at upgrading the customer to Boron-SR4 or Carbon-SR1 and XR 6.1.4 or 6.2.2.
Giles
07-21-2017 04:54 AM
hi, are you talking about linkstate topology?
and which versions of XR and ODL are you using?
07-21-2017 07:46 AM
Hello Giles Heron,
Million thanks for your helping us. I am Xing from Cisco China Local AS team, we have a local customer Sinopac, they are using the ODL. and they have the issue that ODL couldn't get the link updated correctly. Yingchun Huang is the PM of this Project.
And the XR version is XR6.0.2, and the ODL version is distribution-karaf-0.4.2-Beryllium-SR2.
Hope to get your advice.
Thanks Again!
08-03-2017 07:09 AM
Hi Xing,
sorry for the delay in responding
Beryllium-SR2 is pretty old, as is XR6.0.2. It might be worth looking at upgrading the customer to Boron-SR4 or Carbon-SR1 and XR 6.1.4 or 6.2.2.
Giles
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide