The Systems Development Unit (SDU) is pleased to announce immediate availability of the Cisco VMDC Release 3.0.1, an incremental enhancement to VMDC 3.0, which provided FabricPath based infrastructure designs for the Unified Data Center. Positioned for Private and Virtual Private Cloud deployments, VMDC 3.0.1 includes the following enhancements and additional HW validation:
ASA Clustering with ASA5585 Appliances connected to Aggregation-edge via vPC.
ACE-4710 vPC connectivity to Aggregation-edge
VIC1280 in B-Series UCS System for VM-FEX deployment
Sup2E/F2E cards in Nexus 7000 to define aggregation edge
Expanded implementation guidance for the VSS DSN connected to Aggregation-edge via vPC.
Sup2/F2 based Access-edge with FEX 2232 and Host vPC
Design Guide and Implementation Guides are now available for download!
Hello, I did a home connection using a wireless router and client. I have a wireless router, 2 desktop computers, a laptop with a wireless interface card, a television, a cable modem and a cable splitter.I have done all the configurations. I con...
We are looking to replace one Juniper QFX5200, Broadcom Tomahawk based switch with two 93180YC-FX/FX3 switches.On this Juniper switch, there is a GRE tunnel providing IPv4 and IPv6 transport, also running OSPF and OSPFv3. From Cisco Nexus 9000 N...
According to the whitepaper below
"...needs Cisco CSR 1000V Series routers in each region for traffic...
I am little curious about the vPC management design for Peer Keepalive Link.
According to the following URL which is traditional Nexus7000 Series vPC Best Practices.
Best Practices for Virtual Port Channels (vPC) on Cisco Nexus 700...
I have been reading vaious Cisco documents about ACI Hybrid Cloud setup (for Azure or AWS). However I am kind of confused from one doc to another. Here below are some confusing points hope someone could help clearify.
Whether using raw Internet OR ...