** NOTE :: please download the QSG PowerPoint file (pptx) attached below: as the website tool is capturing the first part of the animation and skewing the slides. **
This Quick Start Guide (QSG) is aCookbookstyle guide to Deploying Data Center technologies withend-to-endconfigurations for several commonly deployed architectures.
This presentation will provide end-to-end configurations mapped directly to commonly deployed data center architecture topologies. In this cookbook style; quick start guide; configurations are broken down in ananimatedstep-by-step process to a complete end-to-end good clean configuration based on Cisco's best practices and strong recommendations. Each QSG will contain set the stage content, technology component definitions, recommended best practices, and more importantly different scenario data center topologies mapped directly to complete end-to-end configurations. These QSG's are geared for training network engineers, network operators, and data center architects to allow them to quickly and effectively deploy these technologies in their data center infrastructure based on proven commonly deployed designs.
I have a voice recorder connected to 2 leafs using 2 nics on the server. And 2 SIP routers connected to separate leafs (no vpc).
Can I configure SPAN to the voice recorder?
What would be the best approach? span with vpc to the server?...
We have a pair of NEXUS 93180LC-EX switches in a NX-OS setup.They act as the core and have multiple VLAN's with HSRP enabled.We had a single DHCP relay agent enabled and that was working fine. The problem we are seeing is when we tried to upgrade and...
Hello All,I am looking for a simple logical reasoning behind a small thing that has been troubling me.Please refer to attached diagram to better understand this situation. I am going to ping PC-2 from PC-1 in different subnets and VLANs, with a proper rou...
We have some Nexus 9k and a DCNM, where the Nexus 9k are loaded in an external type Fabric. The Fabric is only used for monitoring the Nexus 9k (read only). Nexus 9k are managed with CLI commands.I need to know if it is possible to manage the Nexus...