In Unified Computing system (UCS) the underlying hardware (or server) can be made completely transparent to the OS or applications that run over it. The kind of environment which an OS or application requires can be moved from one server to another or can be changed very easily. This is made possible by moving resources, such as MAC addresses, WWN values, IP addresses, UUID, firmware versions and even server BIOS, from one server to another at the time of deploying the server. This is accomplished by using the concept of Service profiles; which is like software definition of a server. The concept of stateless computing facilitates much greater scalability and can be used in conjunction with virtualization to achieve maximum data center utilization.
Stateless Computing Overview
Various resources responsible to make the stateless nature are:
a) MAC addresses and WWN values: These can be moved form one server to another server as defined in service profile.
b) UUID value: UUID acts like an identity to the server and can be moved from one server to another.
c) Firmware and BIOS revisions: As per requirement, firmware and BIOS versions can be applied to the servers.
As per the application requirements the above values can be changed and so the application can easily run on any of the server blades with the same compatibility. These values can be easily changed using the UCS manager and can be applied to the server before installing the OS or the application.
The following video explains MAC, UUID, WWN pools in detail.
hi,can you please send warranty info for c9148 D48PSK9 and how much is the warranty for one yearI have serial number of product and want to know if that product still under warranty and what is start and end date Dr. Davood Ashrafisenior system engin...
Hello, We have an HyperFlex system with 5 nodes HXAF240C-M5SX, HX 4.0(2B), UCS Server FW 4.0(4k) and UCS FI 4.0(4h), Vmware ESXi 6.7.0 U3 (17098360) and VMware vCenter Server Appliance 22.214.171.124000 (19299595). We are planning to migrate to HX 4.5...
Hello, my team has followed the deployment guide for the ACI Simulator 4.x on VMware ESXi. For some reason, I can see the vNIC mac addresses on the switches connected to the host, but I don't see the apic1-eth1 MAC address, and the VM won't respond to pin...