We have covered the following topics in both the blog and the video:
1. vPC Overview and Operation
2. Configuration and Show commands
3. vPc Failure Recovery
4. General Recommendations to ensure Stable operation of a Virtual Port-channel topology.
For more details please refer our Blog and you can also dowload the Presentation
If you are having issues with viewing the Video - Please check your browser's security settings.
Nice video but you should refrain from using the term STP loop. STP is to stop bridging loops. Very seldom would a loop form due to STP unless there is a unidirectional link.
I know many people use this term but as Cisco professionals you should set a good example by using the correct terms.
Thanks Daniel for appreciating this Video. You made a very valid point that it’s always a Bridging Loop and our context here was the loop created due to STP failure and that’s why we usually use the term STP loop but as you rightly said, the best terminology should be Bridging loop created due to STP Failure. Point noted.
Thanks again and best regards,
Vinay, Vivek, Pradeep.
Do you have any video planned on different designs regarding caveats like not running L3 over the vPC and things like that? I know there are some very good sessions at Ciscolive365 as well.
Hi Daniel ,
We can definatley plan our next video on Design Caveats. Will Keep you posted on this.
Vinay, Vivek, Pradeep
can't watch the video.
Have you checked your security settings in the browser? I had to allow scripts in Chrome for it to run. Also try with another browser.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: