i have two vlans vlan 100 and vlan 105. vlan 100 has 2 servers with same subnet ip of range 172.26.226.x and 4 servers in vlan 105 with subnet ip 172.26.227.x.these servers traffic needs to be managed using cisco 4710 ACE load balancer and thats where I need some help as the servers gateway is same as that of load balancer.so one-arm mode4 is only option.
I am providing the nw diagram.
there are two load balancers. so redundancy is also to be done.default gateway to be given in lb is 172.26.226.65.
Please give the config details for load balancers.I have gone through some of the cisco docs but not much help
Hello All,How we can check real time traffic logs between host to host in ACI just like we can check in catalyst switches by enabling netflow on SVI interface or add ACL log input on SVI interface or in monitor captures.Appreciate your help on this.
On June 12th, the Cisco Customer Connection program is hosting an online NDA briefing covering the planned roadmap for Cisco Nexus Switching hardware. Registration closes at 9am on June 11th, so don't wait!
Join the Customer Connection program to re...
On June 11th, the Cisco Customer Connection program is hosting an online NDA briefing covering the planned roadmap for Cisco Hyperconverged Infrastructure products. Registration closes at 9am on June 10th, so don't wait!
Join the Customer Connection...
I am playing with new cisco cml 2.0 lab simulator and seeing strange behavior not sure if its real issue or limitation of cisco lab.dist1 and dist2 is my vPC (NSOX 9000v) peers, and tor1 is IOSv switch configured for port-channel.dist1interface Vlan100
Hi, I am not able re-sequence the ACL on Nexus 7000.Getting below error.---------------------------------------resequence ip access-list testACLin 11 2ERROR: This operation is not allowed when user session is active Please help.