Membership in the Cisco Customer Connection program is required to
attend. Registration is free and easy to complete. During registration,
choose the Data Center track. Once your membership is approved, you'll
be able to register for this session. Join us...
Want roadmaps? Are you headed to Cisco Live? You're in luck! As a member
of the Data Center Customer Connection program (CCP) you have access to
roadmap sessions exclusively at Cisco Live if you've registered for a
full conference pass. Not a Data Center ...
This January Cisco announced platform innovations for HyperFlex 3.0 with
a software releases that delivers performance and extends the
operational simplicity of hyperconverged infrastructure to any
application, with any cloud, at any scale. The result has...
To view the video in a larger window, or full screen, click this link.
In many organizations, the security of the data generated and stored
across varying systems and platforms is becoming a significant point of
concern. The protection of data has traditi...
Recently, we published the Cisco Hyperflex VSI CVD 2.0 (link here). The
CVD was based on HXDP software version 2.0.1a and Cisco UCS Manager
version 3.1(2f). Major features supported in HDXP 2.0.1a that are
covered in the CVD:- New All-Flash HX server mode...
Hello, Can someone give me simple and clearcut explanation pdf to understand multi-pod and multi-site features? differences between multi-pod and multi-site?how they work?how to configure them ? thank you very much
Hello,we have two pairs of Nexus 5672UP (one pair/site). They are running 7.3(3)N1(1) with LAN base license LAN_BASE_SERVICES_PKG. We want to configure Switch-to-Switch encryption between the two sites, by using TrustSec MacSec (Switch-to-Switch link secu...
Hi, I'm trying to understand under which scenarios it is recommended to enable GARP (and hence, ARP Floding). According to the ACI Fabric Endpoint Learning White Paper: Cisco ACI can detect MAC and IP address movement between leaf switch po...
HiI have a Problem in symmetric hashing on port channel in nexus 3172PQ.In my design i want to use two Nexus 3172PQ that ether channel together. between these switches, there is a layer 2 devices that capture traffic flow. But when enable port channel on ...
Hello, we have a DCNM 11.1(1) classic LAN installation. On our environment we have Nexus 5K with FEX N2K-C2248TP-E-1GE and Nexus 7K with FEX N2K-C2348TQ-10G-E. DCNM Monitor > LAN > Ethernet shows the interfaces for the N2K-C2248TP-E-...