Want roadmaps? Are you headed to Cisco Live? You're in luck! As a member
of the Data Center Customer Connection program (CCP) you have access to
roadmap sessions exclusively at Cisco Live if you've registered for a
full conference pass. Not a Data Center ...
Cisco Live San Diego will feature an opportunity to get hands on
experience with Intersight features and programmability. Check out lab
session: Configuration and Troubleshooting of Cisco Intersight with UCS
- LTRDCN-2380 It will cover the following:* Int...
HI, Is there any 24 port or 48 port cisco switch which can be used either for data as 10Gig( SFP+) ,1Gig(SFP) and1Gig(Copper) and QSFP as uplink The response will be appreciated, Thanks and RegardsBibek.
Is the old Cisco Fabric manager the only GUI to manage my fabric? I'm upgrading to MDS 9148S switches and was under the impression there was a new way to manage the fabric, but all I can find is the old Fabric Manager.
We are Planning to have an upgrade on the Nexus 7000 to the version 7.3.3.D1.1.In our infrastructure, we have FEX , some of them are dual home and other are single Homed..As described in the link below the ISSU is not supported when we have Dual Home...
Please note, I am no where close to be a SAN expert/specialist... Here is the scenario:Customer has two DCs (Primary and DR). Both are using FC SAN for storage (Brocade 7800). Customer wants to migrate to ACI, ACI Multi-Site particularly. The connect...
Hello all,I have BGP configured on my Nexus 7010 and all seems to be working normally. But I am seeing a couple things that don't seem normal and am looking for inputs / suggestions. Here is my BGP config on the Nexus 7010router bgp 65172 route...