Last week, here, I started my 2 part blog on some of the top SAN design
and deployment challenges we see. As I mentioned, I put this together
with help from my SAN expert colleagues, Barbara Ledda and Wolfgang
Lang. We are all part of the Cisco Services p...
One of the aspects I really enjoy about my job is that I get to learn
from some of the world’s top network and data center design engineers,
and I get to hear about technology adoption challenges across the world.
If there is a complex network or data cen...
MDS 9500 family has supported customers for more than a decade helping
them through FC speed transitions from 1G, 2G, 4G, 8G and 8G advanced
without forklift upgrades. But as we look in the future the MDS 9700
makes more sense for a lot of data center des...
Hi, I have some queries regarding VMM Integration to aci. My ACI topology is like 1 BD = 1 EPG = 1 VLAN type. All vlan gateways are on firewall, outside the ACI. Using dot1q , i am flowing traffic from endpoint to firewall Gateway. A...
Hello- Just curious if anyone has used "hardware ip glean throttle" command on the Nexus 9K platform. In our situation, we have VXLAN leaf switches with the anycast gateway configured and on some of them we are getting many, many L3 glean drops...
Hello,we are currently implementing our ACI fabric and have Version 4.1(1i) running.Is there a way to enter MAC addresses into the ACI configuration and preconfigure which EPGs this MAC address will be part of? So as soon as the endpoint is connected...
Cisco Workload Optimization Manager (CWOM)
Continuously Assure Application Performance at Any Scale
Webinar: Wednesday, October 23rd at 11am ET
Today’s applications utilize traditional virtualization platforms as well as newer DevOps meth...