In 2019, several major data center infrastructure shifts are converging.
Edge computing, artificial intelligence and network programmability will
all shift the nature of how you run data centers. Check out the top 10
data center and infrastructure trends ...
ITD (Intelligent Traffic Director) is a hardware based multi-Tbps Layer
4 load-balancing, traffic steering and clustering solution on Nexus 7xxx
series of switches. It supports IP-stickiness, resiliency, NAT (EFT),
VIP, health monitoring, sophisticated fa...
I am Vinay Kumar (CCIE R&S # 35210) and I work for the High Touch
Technical Support (HTTS) team, a team that provides reactive technical
support to majority of Cisco’s premium customers. Vivek Ruhil (CCIE SP #
40530) , Pradeep Malik ( CCIE R&S, SP # 25302...
Tina Feng | January 31, 2012 at 7:16 pm PST on Blogs.cisco.comFor anyone
who has ventured to a tech conference, flown into an airport or even
driven down CA highway 101 this past year, it’s clear that cloud is
still top of mind for many technical and busi...
Jake Howering | January 6, 2012 at 8:56 am PST reposted from
LISP solves the problem from client to server, IE Ingress Path
Optimization. FHRP solves the pro...
Hi,I am new to ACI. I like to keep single Physical domain & AAEP as per attached diagrammed requirement. Kindly advise that as configured in attached diagram, is it the best approach or there are better ways to do it. BD-Vlan10[subnet:10.10....
Hello, I am looking for advice regarding ACI implementation in brownfield environment. Existing data center is build around Nexus3k switches, and vPC based fabric. Most of server vlans at layer 3 are terminated of FortiGate firewall. Ther...
I am running VXLAN BGP EVPN on my core. Cisco N9K as the spine and Cisco N3K as the leaf. For sometime now I am experiencing the above error in N3K. Anytime it pops on the logging, all my phones restart. I will appreciate assistance from anyone on this as...
Hello! I have an interesting task here. I have production tenant that has L3Out connected to an external router, behind which my management server located. Now fabric managed via out-of-band, I want to configure in-band management and I need to reach...
Hi all, I am curious about, Does FEX(N2K) with N5K as parent support L3 interface?My N2K is N2K-C2248TP-E-1GEMy N5K is N5K-C5672UP-16G here is the following output as I try to configure it as L3 port:N5K_(config)# interface ethernet 101/1/23N5K_...