Created by: Reni Popara on 09-09-2013 04:22:37 AM Hi,
How can I change vlan for existing service profiles?
I manage to change mtu by: Selecting service profile $sp = Get-UcsServiceProfile -Name Test Selecting eth0 from previous selected service profile $eth0 = $sp | Get-UcsVnic -Name eth0 Setting MTU on selected eth0 from profile "Test" $eth0 | Set-UcsVnic -Mtu 9000 -Force
I don't see the way because I can't list VLAN name associated on ethx with get-VnicVlan. Please help
Thanks! Br, Reni
Subject: RE: change vlan on service profiles Replied by: Sage Harvey on 09-09-2013 09:06:27 AM Hi Reni,
Assuming you have created a new VLAN called "production_vlan500" and you're replacing an old one called "production_vlan300", you could do this:
Adding is working but for removing it I need to save desired vnic Interface and then I'm able to remove it: $vlan300 = Get-UcsVnicInterface -Name production_vlan300 $vlan300 | Remove-UcsVnicInterface -Force
Following the guideline on 'How To Setup Your Own Computer' @https://developer.cisco.com/learning/modules/intro-to-aci/sbx-intro-aci-02_programmability-options/step/2,came-up with an issue, as per Title, when installing ACI Toolkit after git clone https:/...
Hi All,I have been using Python sdk of UCS, ucsmsdk for managing fi operations.But i could not find the appropriate one for the 'show mac address-table' output which is shown below.fi-B(nx-os)# show mac address-tableVLAN MAC Address Type age Secure NTFY P...
Hi All,I have been using Python sdk of UCS, ucsmsdk for managing fi operations.But i could not find the appropriate one for the 'show flogi database' output.Looked at all mometa classes. But could not find it. Please let me know if the same is availa...
Recently, works have begun to arrive that the free memory on the Cisco Nexus 3064 is running out.Notices have an appearance:CRITICAL. Usage 86% of Available MemoryMemory now has 3 statuses:# show system memory-thresholds
System Memory thresholds:
Hi,The following low-severity issue "Interface-name, No answer from host" is frequently appear in my NMS.Not much information available online about this issue, appreciate if someone can assist interpret this log message?Thanks