Are you recognized by your peers as a thought leader based on your strong technical knowledge of Cisco products and technologies? Do you maintain an active online or social presence to interact with others and share what you know?
If that sounds like you*, we invite you to submit your nomination for the 2016 Cisco Champions program. Nominations will be held from October 15th to November 15th 2015.
Cisco Champions are an elite group of technical experts who are passionate about IT and enjoy sharing their knowledge, expertise, and thoughts across the social web and with Cisco. The program has been running for over two years and has earned two industry awards as an industry best practice.
What is a thought leader? Nominee is regarded as a community influencer/technical authority via online and offline contributions in social media, third-party technical forums, communities, user groups, speaking engagements, or other publicly-accessible venues. Nominee has made impactful contributions to Cisco technology communities in the past 12 months.
*Applicants must be at least 18 years of age and cannot be a government official or Cisco employee.
Need some advice about the design, will it work.Please refer to attached diagram. N7K-1 and N7K-2 interconnect on port-channel 1 running fabricpath.N7K-3 and N7K-4 interconnect on port-channel 1 running fabricpath. Host A on VLAN190 ...
Hello, Could you check out my config template, I just want to make sure that it makes a domain and works properly, I am about to put it on a production. thanks a lot 5k-1#Config T
5k-1(Config-Fex)#Pinning max-links 1
Hi, Could anyone here please help clarify if I can configure either BIOS of Cisco 12G SAS Raid bios to have a standard SATA hard drive access? I am having a Cisco C220 M4 server with Cisco 12G SAS raid controller...
Hi,The APIC EP tracker does not give results when searched with VM name.FYI: Getting results when searched with same IP address.Has anybody tried this ? The tool tip shows as:e.g., 00:50:56:BD:2E:6C, 10.0.0.1 or 2002:50:22:0:50::1, or comp-vm1APIC ve...
I have 2 x 7009 chassis, each have 2 x SUP1 supervisors (NXOS 6.2(16)), 3 x M108X2-12L, 1 x M148GT-11L line cards and 5 x FAB2 fabric modules. These act as the core switches, with VPCs to downstream Nexus 5500s.I need to replace the modules in each 7009 w...