When we think about fabric switches, we tend to consider low-end hardware. These typically do not require considerable memory, CPU, intense resources, or functionality. We also tend to think about them as just aggregation layer switches which will reduce our cable runs to the core switch. This helps keep investment and operation costs under control – fewer cables, hardware resources, and management.
All this is true and I am not in disagreement with the previous statements. However, let me address some recent changes that should be considered before making an investment decision.
Storage Area Networks are Evolving
Spinning disks are being replaced with All-Flash Arrays with NVMe on the horizon. Servers are moving to NVMe storage as well as being NVMe/FC capable. Moreover, Storage Area Network (SAN) Directors also support NVMe/FC, along with robust hardware and software capabilities. The most ignored point is the fabric switch, where we connect our hosts and storage ports. This becomes a real problem if they have limited resources and feature support. More often, the performance problems are found on the edge switches, rather than the core switches because that’s the highway entry for the packets to get into the fabric.
Now, what if we had more powerful hardware with more robust feature sets in this small form factor switches that we currently see in Director-class core switches? Cisco’s MDS 9000 Series 32G fibre-channel (FC) switches have this unique advantage, using the same switching ASICs across 32G FC Director modules and Cisco MDS 32G FC fabric switches.
10 Unique Enterprise Level Fabric Switch Features
Let’s discuss some of the unique enterprise-level features of these fabric switches:
The port ASIC. All three switches are using the same ASIC that we are using in MDS 9700 32G FC module. This means this small fabric switch has the power of a modular switch. Small doesn’t mean less for Cisco MDS fabric switches.
NVMe/FC support. Supported transparently across all the switches.
Scalability: Offering a wide range of selection from 8-port to 96-port configuration.
SAN Analytics. Dedicated hardware to support Cisco’s unique cost-effective, simple and secure solution for deep packet visibility across the fabric.
Security. Cisco’s unique approach to security using anti-counterfeit technology and secure boot.
Ease of deployment. Unique Autozone feature to automate zoning functionality.
Simplified Management.Cisco DCNM is a single-pane-of-glass dashboard to manage all Cisco MDS switches.
Feature parity. Benefit from the same level of inflight encryption, buffer credits, long-distance DWDM connectivity, same port group size, and non-oversubscribed line-rate performance across all fabric switches.
Redundancy. Field replicable and redundant 80Plus Platinum-certified power supplies and FAN trays
Flexibility. Front-to-back or Back-to front airflow options.
So, now when we go FC switch shopping, we don’t have to worry about features as they are common across all different models, just know how many ports we need and that’s it.
In the next blog, we will cover one more such topic: How Cisco MDS switches are leading innovation.
When we upgraded our 5K's recently we experienced an issue where the port-profile inheritance was removed and replaced by the port-profile commands minus the VPC ORPAN-PORT SUSPEND command which was also removed from the port-profile configuration. The re...
We will be migrating our on-prem Domino messaging environment to Exchange On-line in our Microsoft 365 tenant. Currently we have 2 C300Vs in the DMZ acting as our edge SMTP servers. Currently, outbound traffic is routed to the Internet. ...
Hi, I have a customer requirement to run Vxlan between 2 DCs, but without the clos (spine/leaf) architecture. The reason is primarily cost, so they didn't invest in a bunch of switches with SDN. The use case is just vm-mobility across the DCs.Just want to...
Hey Folks,I have an issue where I would need to remove one VLAN from a VLAN Pool which is used by two productive VMM Domains.. don't ask me why..I already checked that the desired VLAN is NOT used by any existing Port-Group right now, so that seems nice.T...