ACI Fabric start learning external remote IP’s locally on the Leaf switches . Due to this reason, traffic is locally dropped on Leaf Sw03 instead of going outside the fabric. This issue basically interrupted most of the External & Internal services because (ACI firewall IP’s and External LB IP’s plus additional IP’s from HQ and Branch Network) are learning on the Leaf switch03 & 04 Endpoint table.
Please find below the EndPoint table as under:
LFSW03# show endpoint ip 10.x.x.1xx
s - arp O - peer-attached a - local-aged S - static
Hi All, I believe based on data sheet, APIC standby will upgrade automatically after APIC active upgraded, but in fact I have experience with two customer that have APIC active and APIC standby. APIC standby will not automatically upgrade after APIC ...
Hi, I want to extract the APIC config that which BD(subnets) is linked with which EPG & further how that EPG is configured with , Physical port, encap, Domain(Phy/VMM) and IPG. I want to extract the information on excel to get an overvi...
while upgrading the Spine switch manually, it enters a boot loop and shows this error: ERROR ERROR SYSTEM IMAGE CORRUPIn /etc/rc6.d/S9[ 66.386004] reboot: Restarting system Do you have any idea, how to resolve this? Thnx