Essentially, you need to pass the statistics object in which *Max,*Min,*Avg values need to be cleared to the ClearStats function.
Thanks, - bhaskar
Subject: RE: PowerTool: How to reset all vNICs stats at one time? Replied by: Tsu-Sheng Tsao on 10-04-2012 03:16:11 AM Bhaskar, thanks. I will try that.
Subject: RE: PowerTool: How to reset all vNICs stats at one time? Replied by: Justin Turver on 05-05-2013 12:28:18 AM Hi We have a monitoring tool that queries UCS error and pause stats, and records them as a heat map. It uses the "Value" field as opposed to Avg, Min, and Max because we want to see anything that has a history of faults over time. "Delta" values do not persist for long enough. However, once the underlying cause for a fault has been resolved, the tool still reports faults becuase it reads the "Value" field (for e.g. Error stats - Fcs errors). Is there a way to reset the "Value" field as opposed to Avg, Max, Min and Delta? Many thanks Justin
Following the guideline on 'How To Setup Your Own Computer' @https://developer.cisco.com/learning/modules/intro-to-aci/sbx-intro-aci-02_programmability-options/step/2,came-up with an issue, as per Title, when installing ACI Toolkit after git clone https:/...
Hi All,I have been using Python sdk of UCS, ucsmsdk for managing fi operations.But i could not find the appropriate one for the 'show mac address-table' output which is shown below.fi-B(nx-os)# show mac address-tableVLAN MAC Address Type age Secure NTFY P...
Hi All,I have been using Python sdk of UCS, ucsmsdk for managing fi operations.But i could not find the appropriate one for the 'show flogi database' output.Looked at all mometa classes. But could not find it. Please let me know if the same is availa...
Recently, works have begun to arrive that the free memory on the Cisco Nexus 3064 is running out.Notices have an appearance:CRITICAL. Usage 86% of Available MemoryMemory now has 3 statuses:# show system memory-thresholds
System Memory thresholds:
Hi,The following low-severity issue "Interface-name, No answer from host" is frequently appear in my NMS.Not much information available online about this issue, appreciate if someone can assist interpret this log message?Thanks