I have one urgent requirement from my client, to write a TCL script for monitoring one of our LDAP server. As i understood from other posts, default script will send only a anonymous bind request which is getting failed in my case, so i have captured the packet on ldap server when client is initiating the traffic and i have modified accordingly with hexadecimal but still i am encountering with 30004 return code.
I am struggling on this issue for last one month; it would really appreciated if someone could guide me to take it forward.
Hello Experts, MSO with 3 APIC's x 2 sites is configured and is working well as the connectivity is between Core to Core, however redundancy is not achieved, I need help to configure an additional link from the 2nd core from DC and the same cor...
Hi All,i am going to deploy Hyperflex with Vmware for Testing Purposes.Are there CLI commands to do a factory reset of a new Hyperflex system and rebuild hyper flex again?is there any procedure for rebuild Hyperflex?
Hi,Does the "Cisco’s Massively Scalable Data Center Network Fabric" (MSDC) Architecture be managed by ACI ?I mean can the physical topology of the ACI network be a MSDC network?Cisco’s Massively Scalable Data Center Network Fabric White Paperhttps://www.c...