Join Sean Merrow as he takes your questions about configuring and troubleshooting the ACE module and ACE 4710.
Sean Merrow is an escalation engineer working in the Cisco Technical Assistance Center in Boxborough, Massachusetts. He has been with the Application Networking Services team for three and a half years. His areas of expertise include product configuration and support for the load balancing products, including the Cisco ACE module, ACE 4710 appliance, Global Site Selector, Content Services Switch, and Content Switching Module. He holds a bachelor's degree in information technology from the University of Massachusetts and CCIE certification (#25197) in Routing and Switching.
This TweetChat is the first in a series from our Ask the Experts group and will take place on Thursday, June 10 from 11:00am – 12:00pm PT using the #ciscosupport hashtag. Discussion will include:
• Configuring and troubleshooting the ACE module and ACE 4710
Submit questions in advance to @ciscosupport with the hashtag #ciscosupport or submit by posting a comment below (log in with cisco.com userid to post a comment).
What is a TweetChat?
Tweet chats are online conversations, held at a pre-arranged time, between a group of Twitter users, and using a specific Twitter hashtag to identify the discussion.
How Do I Participate?
On the day of the event, go to http://tweetchat.com/room/ciscosupport to follow the #ciscosupport hashtag. Alternatively, you can use your favorite Twitter client (i.e. Tweet Grid, TweetDeck) or TwitterSearch to follow the chat hashtag. During the event, you can follow the discussion, contribute questions, and submit your own comments by using the same hashtag.
Hi,We have a Nexus 5596 vpc domain with some FEX connected in double side topology. We start the upgrade process in the primary vpc domain switch. When upgrade the primary switch, they reboot and don't come up. The lights are power off, only the fans are ...
I'm attempting to do an sftp backup. I created a repository, but was am getting this message both in the local repository and remote:Error: There is a problem with operating Database. Please check oracle database documentation for more details.  ...
Hi, I have a customer that has split Nexus devices between DCs and is possibly using vPC between the DCs. I have read this is not recommended and OTV to be used. I was reading this article and also noticed that HSRP when configured on Dual Nexu...
Hi Team , In ACI environment, how can we execute telnet command on the spine switch to check if the destination host is listening on any port . Say example 10.10.10.1 is the host connected to leaf , and If we want to test 10.10.10.1 ...
Hi, On ACI we have configured two L3Out using BGP as below;1) L3Out-to-RTR2) L3Out-to-CoreSwitch I have configured some static routes on L3Out-to-RTR as below;External Routed Networks->L3Out-to-RTR->Logical Node Profile->Configured Node...