This document contains the slides for the live webcast.
During the live event, Louis will cover the configuration and design options for the Virtual Supervisor Module and Virtual Ethernet Module. He will also go over some common deployment issues, how to troubleshoot them, and design options for the Cisco Nexus 1010 and 1110 appliances. Louis will also cover some of the common issues that customers encounter when deploying Cisco Nexus 1000V Series Switches and how to avoid these problems before they become major issues.
With Cisco Nexus 1000V Series Switches, you can have a consistent networking feature set and provisioning process all the way from the virtual machine access layer to the core of the data center network infrastructure. Learn how in this interactive webcast.
Current N1KV releases and new features
Virtual Supervisor Module
Virtual Ethernet Module
Louis Watta is a technical leader in the services organization for Cisco. Watta's primary background is in data center technologies: servers (UNIX, Windows, Linux), switches (MDS, Brocade), storage arrays (EMC, NetApp, HP), network switches (Cisco Catalyst and Cisco Nexus), and enterprise service hypervisors (VMware ESX, Hyper-V, KVM, XEN). As a Technical Leader in Technical Services, Louis currently supports beta and early field trials (EFTs) on new Cisco software and hardware. He has more than 15 years of experience in a wide variety of data center applications and is interested in data center technologies oriented toward data center virtualization and orchestration. Prior to Cisco, Louis was a system administrator for GTE Government Systems. He has a bachelor of science degree in computer science from North Carolina State University.
Hello I would like to setup a new OSPF device on a vlan/subnet where 6 other NX-OSdevices are already operating, used as a transit segment: unfortunately all devicesrun MD5 authentication on their interfaces, and the secret is type 3 encrypted (Igues...
Hello.I have two Cisco Multilayer Fabric Switches (MDS) that are currently on production. They are DS-C9124-K9 switches, as shown in Figure 1. I don't have info about their NX-OS software versions or their current memory contents.Figure 1: Network Diagram...
Hi, A client asked me to configure the OOB mgmt IP on a few N9K in ACI-OS without any APIC before sending the devices to the DC.I personnally do not see any advantage of doing that, but I want to know if technically there is a way to do it (without A...
Hi, Can anyone offer any clarification on the use of "system routing template-internet-peering" on a Nexus N9K-C9336C-FX2. When this is configured, the following message is generated: switch(config)# system routing template-internet-peering...
Hi ACI fans,in the qosClass configuration (qosInstPol: uni/infra/qosinst-default) there is the qosClass configuration.In the 4.x GUI it's under Fabric > Access Policies > Policies > Global > QoS Class.Each QoS class (Level 1 - 6) can be enable...