The Configuration Management Cloud Accelerator Kit v4.0 for Cisco Intelligent Automation for Cloud includes:
Deployment Guide PDF
Cisco Prime Service Catalog (Cloud Portal) 10.0 service catalog packages
Cisco Process Orchestrator 3.0 automation packs
The kit is an extension to Cisco Intelligent Automation for Cloud 4.0 and offers:
Connectivity and Discovery Services for Configuration Management, including:
Puppet Registration and Lifecycle Management
Roles and Profiles
Class Parameter Overrides (via Profiles)
Chef Registration and Lifecycle Management
Attribute Overrides (via Data Bags)
Configuration Options when Ordering Virtual Machines from a Template
Bootstrapping Chef clients and Puppet agents onto new compute nodes
Support for servers created by vCenter, vCloud Director (coming soon), OpenStack, UCSD and Amazon EC2
Invoking a configuration run to configure a server with the correct role
Please note that as a cloud accelerator, the configuration management content will continue to evolve over time and may include integrations with other configuration technologies. We welcome comments and suggestions and will do our best to respond and update as appropriate.
With regard to support, the first point of contact should be the author and/or this community. If you are having issues, moderators of this forum will determine and advise if a TAC case is appropriate, otherwise issues will be addressed here.
Hello,we have a UCS mini implementation with a pair of FI6324s and we would like to acquire a pair of Nexus switches which will be strictly used for the interconnection between the FIs and 3 Netapp AFF C190 Storage Arrays. The blades (four actually) are B...
Hi All, Is there any CLI command available on Cisco ACI Leaf to check the live traffic statistics on particular interface...as like we are checking with IOS / NX-OS with "sh interface eth1/2" This command is working on Leaf But not showing...
I'm trying to find some documentation for the MDS9148S Switch that proves the support of the following port types: F_Port (Fabric), M_Port (Mirror Port) and E_Port (Switch-to-Switch). I easily found F_Port and E_Port:Fiber Channel standard port types...
I am trying to find out where zoning changes are logged to. For example, an admin creates a new zone, adds it to the active zoneset and commits the changes (we usually do this via CLI). A little while later we get a report of an issue and...
Hi Cisco experts, I need your help to understand why the VRFs have to be configured with a set of "route-target both auto" and "route-target both auto evpn" in a Fabric with VXLAN BGP EVPN. Knowing that the Fabric can work normally with a set of ...