The Configuration Management Cloud Accelerator Kit v3.1.1 for Cisco Intelligent Automation for Cloud includes:
Deployment Guide PDF
Cisco Prime Service Catalog (Cloud Portal) 9.4.1 service catalog packages
Cisco Process Orchestrator 2.3.5 automation packs
The kit is an extension to Cisco Intelligent Automation for Cloud 3.1.1 and offers:
Connectivity and Discovery Services for Configuration Management, including:
Puppet Registration and Lifecycle Management
Roles and Profiles
Class Parameter Overrides
Chef Registration and Lifecycle Management
Configuration Options when Ordering Virtual Machines from a Template
Bootstrapping Chef clients and Puppet agents onto new compute nodes
Support for servers created by vCenter, vCloud Director, OpenStack and Amazon EC2
Invoking a configuration run to configure a server with the correct role
Please note that as a cloud accelerator, the configuration management content will continue to evolve over time and may include integrations with other configuration technologies. We welcome comments and suggestions and will do our best to respond and update as appropriate.
With regard to support, the first point of contact should be the author and/or this community. If you are having issues, moderators of this forum will determine and advise if a TAC case is appropriate, otherwise issues will be addressed here.
i am upgrading n5600 vPC pair. there are unicast multicast hosts conneced behind this vPC pair. vPC secondary ugprade doesn't cause any outage.vPC primary is causing about 3 minute outage when it comes back up after reload due to upgrade. following a...
Hello,We facing a latency issue for all LUNs that connected between Cisco MDS 9148S 16G switch and the storage, when I run command " show logging onboard error-stats" I see that counter "FCP_SW_CNTR_RX_WT_AVG_B2B_ZERO" is increasing in the two ports ...
Dear All, I am observing FRU Powered ON/OFF Alarms on ACI Nexus 9K Switches on my NMS. The alarm came and go, but I am unable to pinpoint what FRU powered On/Off. I do not see any alarms on the ACI GUI a...
NXOS release 9.3(6) brand new intalled on N3K-C3048TP-1GECisco reference manual:https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/programmability/93x/guide/b-cisco-nexus-3000-series-nx-os-programmability-guide-93x/b-cisco-nexus-3000-s...
Hello experts,I wish to limit polling by specific SNMP manager to specific MIBs on switch’s SNMP Agent.I was hoping to find something that will associate a set of MIBs with a Community, so, any SNMP polls specifying that Community value would be limited t...