cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

UCS Fibre Channel Switch Mode

3894
Views
0
Helpful
0
Comments

Introduction

This document shows how to configure the UCS fc module in fc switch mode. Configurations are provided for both the UCS side and Cisco MDS side. Included are configurations to create trunk and port-channels between the UCS fc module and MDS. Direct attach storage configuration is included. Discussion on default zoninfg and zoning from an attached MDS switch.

VOD is availanle at:https://supportforums.cisco.com/videos/1718

Please provide feedback to help us improve this type of delivery in the future.

Related Information

Implementing PVLAN Feature on UCS 1.4.1

MAC Sync feature in UCS 1.4.1

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here